Projector Usage

Use the black Epson projector remote to:

Turn On the projector, press the blue On button
Turn Off the projector, press the blue Standby button twice while pointing the remote high above your head and at the projector in the back of the room
Volume control

Note: Please turn off the projector when you are done with class otherwise the projected image will dim quickly over time due to usage

Troubleshooting this classroom technology

Projected image is not displayed or projected image is just black or blue

Make sure you are signed on to the computer
Press the Windows and P key on the keyboard simultaneously and select Duplicate
Press the Source Search button on the Epson remote to detect computer input

Computer is not turned On

Press the power button, does a light come on or display light up?
If there is no light or display, check the power strip is turned On and plugged into a wall outlet
Try plugging the computer power cable into another outlet on the strip
Check power cable is plugged tightly into the back of the computer
If the power button is lit up but all displays are dark, try holding it down for thirty seconds and then press it again for 2 seconds. This should force the computer to restart.

No audio from computer or too loud or not loud enough

Use projector remote volume up or down
Make sure computer audio isn't muted (speaker icon located in lower right corner of the computer display)
If showing and online video, adjust audio through the video audio control in the browser
Still no audio:
1. Right-click on the speaker icon in lower right corner of the screen
2. Select Sound Settings
3. Change the Output to another output source such as Espon

Contact the TSC for assistance or report a problem

TSC Phone #: 502-272-8301